Инструкции Пользователя для BMW 2015 BMW i3

Dynamic Stability Control DSC is
switched off or Dynamic Traction Con‐
trol DTC is switched on.

For additional information, refer to Dynamic
Stability Control, refer to page 

namic Traction Control, refer to page 

The Flat Tire Monitor signals a loss of
tire inflation pressure in a tire.
Reduce your speed and stop cau‐

tiously. Avoid sudden braking and steering ma‐
neuvers.
For more information, see Flat Tire Monitor, re‐
fer to page 

.

Illuminated: the Tire Pressure Monitor
signals a loss of tire inflation pressure
in a tire.

Reduce your speed and stop cautiously. Avoid
sudden braking and steering maneuvers.
Flashing and then continuously illuminated: no
flat tire or loss of tire inflation pressure can be
detected.

▷

Interference through systems or devices
with the same radio frequency: after leav‐
ing the area of the interference, the system
automatically becomes active again.

▷

TPM could not conclude the reset: perform
the reset of the system again.

▷

A wheel without TPM electronics is fitted:
have the service center check it if needed.

▷

Malfunction: have the system checked by
your service center.

For more information, see Tire Pressure Moni‐
tor, refer to page 

Steering system in some cases defec‐
tive.
Have the steering system checked by

the service center.

Have the vehicle checked by the serv‐
ice center.
For additional information, refer to On-

.

Turn signal on.
Unusually rapid flashing of the indicator
lamp indicates that a turn signal bulb

has failed.
For additional information, refer to Turn signal,
refer to page 

Parking lights or headlights are acti‐
vated.
For additional information, refer to

Parking lights/low beams, headlight control, re‐
fer to page 

The system is switched on. It maintains
the speed that was set using the con‐
trol elements on the steering wheel.

High beams are activated.

Seite 80

80

Online Edition for Part no. 01 40 2 960 865 - II/15