Справочник Пользователя для BMW 01 41 0 155 307

69

n

Intermittent mode:

You can use rotary dial 6 to select from 
four wipe intervals.
In addition, the wipe interval automati-
cally adapts to variations in road speed.

Rain sensor:

The rain sensor is positioned on the 
windshield, directly ahead of the inte-
rior rearview mirror. When the rain 
sensor is activated, the windshield 
wiper is controlled automatically, 
depending on the degree of wetness of 
the windshield (in both snow and rain). 
You do not have to be concerned with 
switching the windshield wiper on or off 
or adjusting the wipe interval between 
intermittent and full wipe. Instead, you 

463de010

can concentrate fully on the traffic 
conditions. This is especially important 
under adverse weather conditions.

To activate the rain sensor:

From ignition key position 1 and up, 
move the lever to position 1. The wipers 
travel once across the windshield, 
regardless of the weather.

You can leave the lever permanently in 
position 1. It is then only necessary to 
activate the rain sensor from ignition 
key position 1 and up. To do this,

>

turn rotary dial 6 briefly or

>

use cleaning windshield 5.

To modify the sensitivity of the rain 
sensor:
Turn rotary dial 6.

Deactivating the rain sensor:
Put lever in position 0.

Turn the rain sensor off when 
passing through an automatic car 

wash. Failure to do so could result in 
damage caused by undesired wiper 
activation.

<

When the vehicle is stationary, the 
wipers switch automatically to intermit-
tent wipe (not on vehicles with rain 
sensor).

When the vehicle is stationary, the 
wipers operate at normal speed (not on 
vehicles with rain sensor).

The system sprays washer fluid against 
the windshield and activates the wipers 
for a brief period.

If you only pull the lever briefly, the 
system sprays washer fluid onto the 
windshield without activating the 
wipers.

Online Edition for Part No. 01 41 0 155 307 - © 09/00 BMW AG