Справочник Пользователя для Brother FAX-2840

a

Press Clear. 
To confirm you are installing a new drum 
unit, press 1.

b

When the LCD shows Accepted, close 

the front cover.

a

Turn off the machine’s power switch.
Unplug the telephone line cord first, 
disconnect all cables, and then unplug 
the power cord from the AC power 
outlet.

(For FAX-2840 and MFC-7240) 
To prevent you from losing any important 
messages, see Transferring your faxes or 
Fax Journal report uu page 74.

 

b

Lift the control panel cover  (1). Carefully 
remove dirt from the glass strip (2) and 
the white bar (3) above it with a soft lint-
free cloth moistened with water.

 

c

Close the control panel cover.

In addition to cleaning the glass strip with 
a soft lint-free cloth moistened with water, 
run your finger tip over the glass to see if 
you can feel anything on it. If you feel dirt 
or debris, clean the glass again 
concentrating on that area. You may need 
to repeat the cleaning process three or 
four times. To test, make a copy after each 
cleaning.

 

d

Plug the machine’s power cord back into 
the AC power outlet first, connect all 
cables, and then plug in the telephone 
line cord. Turn on the machine’s power 
switch.

1

3

2