Справочник Пользователя для Boss Audio Systems ME-50

Adds a undulation like that of a jet ascending or decending.

Adjusts the rate of flanging effect.

Adjusts the depth of flanging effect.

Adjusts the amount of resonance.

“Harmonist” is an effect which the amount of shifting is 
adjusted according to an analysis of the guitar input, 
allowing you to create harmonics based on diatonic scales.

Specify the key of the song you are playing. By specifying the 
key, you can create harmonies that fit the key of the song.

The selected key is shown in the display.

The key setting corresponds to the key of the song (#, b) as 
follows.

fig.0150

This determines the pitch of the sound added to the input 
sound, when you are making a harmony. It allows you to set 
it by up to 1 octave higher or lower than the input sound.

When set to “0,” this yields a “detuned” effect that adds 
sound of slightly different pitch to the input sound.

fig.0160

Adjusts the volume balance between the direct sound and 
the harmony sound.

Tremolo is an effect that creates a cyclic change in volume.

Adjusts the frequency (speed) of the change.

Adjusts the depth of the effect.

With the volume level of the left and right sides alternately 
changing, when playing sound in stereo, you can get an 
effect that makes the guitar sound appear to fly back and 
forth between the speakers.

Adjusts the frequency (speed) of the change.

Adjusts the depth of the effect.

This effect creates vibrato by slightly modulating the pitch.

Adjusts the rate of the vibrato.

Adjusts the depth of the vibrato.

Although this resembles a phaser effect, it also provides a 
unique undulation that you can’t get with a regular phaser.

Adjusts the rate of the UNI-V effect.

Adjusts the depth of the UNI-V effect.

Adjusts the volume of the UNI-V effect.

Detune

+1 Octave

6th

-1Octave