Справочник Пользователя для Boss Audio Systems GT-6B
68
Chapter 10 Using MIDI
fig.10-19
When the transmission is completed, the screen prior to
transmission returns to the display.
transmission returns to the display.
4. Press [EXIT] to return to the Play screen.
Receiving Data from an External
MIDI Device (Bulk Load)
MIDI Device (Bulk Load)
Making the Connections
When Receiving Data Saved on a MIDI
Sequencer
Sequencer
Connect as shown below. Set the GT-6B’s Device ID to the
same number that was used when the data was transmitted
to the MIDI sequencer.
same number that was used when the data was transmitted
to the MIDI sequencer.
fig.10-02
* For instructions on operating the sequencer, refer to the
owner’s manual for the sequencer you are using.
Receiving
1. Press [UTILITY], then press PARAMETER [
]
[
] so that “Bulk Load” is displayed.
fig.10-20
2. Transmit the data from the external MIDI device.
The following appears in the display when the GT-6B
receives the data.
receives the data.
fig.10-21
The following appears in the display when the GT-6B
finishes receiving the data.
finishes receiving the data.
fig.10-22
Further data can be received at this point.
3. Press [EXIT] to quit Bulk Load.
After you press [EXIT], “Checking...” appears in the
display, indicating that the GT-6B is checking the
received data. When the check is completed, the Play
screen returns to the display.
display, indicating that the GT-6B is checking the
received data. When the check is completed, the Play
screen returns to the display.
MIDI OUT
MIDI IN