Справочник Пользователя для Boss Audio Systems BR-900CD

132

Creating Original Patterns

9. Set the tempo and Quantize values as needed.

10. Repeat Steps 6–9 as needed.

* Press [PLAY] to listen to the recording pattern.

11. When you have finished inputting sounds, move the

cursor to “STOP” and press [ENTER].

* You can also stop recording by pressing [STOP].

Changing the velocity

During Step Recording, when you move the cursor to a point
in the matrix display where a drum sound has been input,
the velocity value appears in the position where the time
signature is normally indicated. At this point, you can
change the velocity by adjusting Fader 1.

fig.03-424d

Deleting unneeded drum sounds

You can use either of the two following methods to delete
unneeded drums sounds in Step Recording.

(Method 1)

1. Move the [CURSOR] to the point in the matrix display

where a drum sound you want to delete has been input,
then press [ENTER].

(Method 2)

1. When you hold down [DELETE/MUTE] and press one

or more track buttons for the tones you want to delete.

You can delete the unneeded drum sound at the current
measure, beat, and clock.

fig.03-410

Naming Patterns

You can use up to eight characters in naming patterns.

* You can not change the Preset Pattern name.

1. Press [ARRANGE/PATTERN/OFF] repeatedly until the

indicator is flashing.

2. Press [EDIT].

3. Press [CURSOR] to move the cursor to “NAME,” and

press [ENTER].

The Change Pattern Name screen appears.

fig.03-427d

4. Press CURSOR [

] [

] and turn the TIME/VALUE

dial to change the characters.

* Press [ENTER] to switch between uppercase and lowercase.

5. Press [EXIT] repeatedly to return to the Play screen.

* During updating, “Keep power on!” appears in the upper line

of the display, while the lower line shows what is being
processed.

You can press [REC MODE] during Step Recording to
switch to Realtime Recording.