Справочник Пользователя для Boss Audio Systems BR-900CD

Use the following procedure to see how much time you have 
left for recording on an audio CD.

The CD menu screen will appear.

fig.05_CDmenu

The Audio CD menu screen will appear.

fig.05_CDaudio

The remaining time for recording on audio CD will 
appear.

fig.05_CDremain

With finalized discs, discs that have been used for data 
backup, and other discs that cannot be used as audio CDs, a 
remaining time of “0” is indicated.

Let’s now listen to the audio CD we have just created using 
the BR-900CD’s CD-R/RW drive. In addition to CD-R discs, 
this drive can be used to play back CD-RW discs that cannot 
be played on standard CD players. Naturally, you will also 
be able to listen to commercially produced audio CDs on this 
drive, and it can even play back audio CDs created using the 
BR-900CD that have not yet been finalized.

 If you are working with an audio CD created with the BR-
900CD, you can play back and check the sounds on the CD 
even before finalizing it. Please note, however, that depending 
on the type of disc used and the data on it, songs may not play 
back properly all the way to the end. If you want to ensure 
that songs play back correctly, finalize (p. 143) the disc.

Songs recorded on an audio CD are often referred to as 
“tracks.” Be careful to avoid confusing these tracks with the 
BR-900CD’s audio tracks.

The CD menu screen will appear.

fig.05_CDmenu

“AUDIO,” and press [ENTER].
The Audio CD menu screen will appear.

fig.05_CDaudio

IMP,” and press [ENTER].
The Audio CD player screen will appear.

fig.05_CDplay