Справочник Пользователя для Boss Audio Systems BR-900CD

If the button flashes in red, that track is ready for 
recording.

fig.00-423

The status of each track can be determined from the 
indicator on the button.

No recorded data exists on the track.

Recorded data exists on the track.

The track is selected for recording.

If a track with existing data is selected for recording, the 
indicator will light alternately in orange and green.

fig.00-424

Since the input is mono, the recording is normally performed 
as a mono recording onto one track. Press one of TRACK [1]–
[6] at REC TRACK to select the one track to which to record. 

However, if you want to record in stereo to increase the effect 
of insert effects, you can simultaneously press the [1] and [2], 
[3] and [4] or [5] and [6], REC TRACK buttons for stereo 
recording onto two tracks.

In addition, Tracks 7/8 are stereo tracks, so they always 
produce stereo recordings.

fig.00-425

fig.00-426

Since the input is stereo, the recording is normally performed 
on two tracks. Press either REC TRACK [1] or [2] to select 
tracks 1 and 2, or [3] or [4] to select tracks 3 and 4. 

However, if you want to mix together the left and right 
channels being input onto one track, with tracks 1 and 2 
selected, press REC TRACK [1] again to select track 1. Using 
the same procedure, you can select any track 1 to 6 to be the 
track to which to record.

In addition, Tracks 7/8 are stereo tracks, so they always 
produce stereo recordings.

Recording on the BR-900CD is separated into three main 
modes.

Use whichever mode is suitable in the course of bringing 
your song to completion.

fig.00-427

or

(Recording in Mono)

(Recording in Stereo)

or

Mixing down
to two tracks

Finishing the song 
with levels optimized