Справочник Пользователя для Boss Audio Systems BR-900CD

Editing the Performance on a Track (Track Editing)

Section 2

fig.02-319d

5. Use CURSOR [

] [

] and the TIME/VALUE dial to

select the track/V-Track to copy from, and track/V-

Track to copy to.

6. Press [ENTER].

fig.02-314d

7. Use [CURSOR] and the TIME/VALUE dial to specify

the beginning of the portion “S” (Start) of data you

want to copy.

8. Press [ENTER].

fig.02-315d

9. Use [CURSOR] and the TIME/VALUE dial to specify the

ending of the portion “E” (End) of data you want to copy.

10. Press [ENTER].

fig.02-316d

11. Use [CURSOR] and the TIME/VALUE dial to specify

the time of the beginning of the location “T” (To)

where you want the copied data to be placed.

12. Press [ENTER].

fig.02-317d

13. Turn the TIME/VALUE dial to select the number of

copies you want to be placed.

14. When you are ready to execute the copy, press

[ENTER].

The display will ask “Are you sure?,” so that you can
confirm the operation.

15. Press [ENTER].

The copy is executed.

16. Press [UTILITY] (or press [EXIT] repeatedly) to return

to the Play screen.

* During updating, “Keep power on!” appears in the upper line

of the display, while the lower line shows what is being
processed.

* After specifying the time in the procedure above, a “+” may

appear to show that there is a discrepancy between the actual
current position and the position displayed. If you specify the
locations using measures, specify the locations at each screen
using the TIME/VALUE dial to eliminate the discrepancy.

You can also enter the time using [LOCATOR], [ZERO],
[STOP] + [REW], [STOP] + [FF], and AUTO PUNCH [IN/
OUT].

Copying a complete track (ALL)

Perform the procedure given below to copy the complete
recorded data from one track to another.

1. Press [UTILITY].

2. Press CURSOR [

] [

] to move the cursor to “TRK,”

and press [ENTER].

fig.02-318d

3. Press CURSOR [

] [

] to move the cursor to “CPY,”

and press [ENTER].