Справочник Пользователя для Boss Audio Systems BV9567BI

03

16

This player is equipped with ISO standard connector, please follow below instruction:

 

●

 

Yellow – 12 V Constant

●

 

Black – Ground wire

●

 

Blue - Power Antenna / Remote Amp Turn On

●

 

Orange – Back-Up Camera Trigger (+)

●

 

Pink – Parking Brake (-)

●

 

White/White black - Left front speaker (+/-)

●

 

Purple/Purple black - Right rear speaker (+/-)

●

 

Green/Green black - Left rear speaker (+/-)

●

 

Red - ACC ON (+12V)

●

 

Grey/Grey black - Right front speaker (+/-)

PROBLEM

CAUSE

SOLUTION

After ignition switch
off ,setting
information all lose

Reset information and save

Change battery or fuse

Cannot power on

Change fuse same as the old one

Some factors cause MPU 
wrong operation

Press RES button on the panel by
penpoint, then, power on

Poor performance 
of radio station

Connot load disk

There is a disk inside 

Remove disc before inserting another one

Weak signal

Move the car to another place, then research

Cannot play disc

Disc is scratched

Change new disc

Put wrong side of disc into
the unit

Insert in the disk with sign side up

Clean lens by lens clean disc

Lens is dirty

Cannot switch

language/subtitle

There is only one language/

subtitle in disc

If disc is not with multi-language/subtitle,

it cannot switch language/subtitle

No image

Other factors cause MPU

wrong operation

Press [RES] button on the panel by 

penpoint, then, power on

Cannot watch

image  during

driving

It’s not allowed to watch image

during driving

Park the car in a safe place,  put the car stall 

in “ P ” postion, pull up the hand brake,

parking brake wire must be grounded 

Check fuse

1. PWR Button
Short press this button to power on, long press this button to power off.
In normal situation, press PWR button can return to the main menu.

2. MUTE Button
Press this button to shut off the sound output, re-press this button can resume the 
sound output, long press this button can turn off the TFT LCD display.

3. DBAS Button
Press this button to bass on/off.

4. VOL- Button
Press this button to reduce the volume.

5. VOL+ Button
Press this button to increase the volume.

6. Eject Button
Press this button can eject the disc.

7. RESET Button
Press this button and this unit will be restored to the initial state.

8. Dual (front and rear) USB
     Warning: You can only use either front or rear USB at a time. Never connect both
front and rear USB at the same time! This could cause malfunctions.

9. Remote control receiver
It is able of receiving infrared signals launched by the remote control matching the unit.

10. Dual (front and rear) AUX
      Warning: You can only use either front or rear AUX at a time. Never connect both
front and rear AUX at the same time!

V

ideo 

output  

2

V

ideo 

input

Front 

right 

speaker

Rear 

right 

speaker

AUX 

input

V

ideo 

output 

1

Wire 

socket

CCD

Subwoofer 

output

Front 

left 

speaker

Rear 

left 

speaker

Radio 

antenna

Wire 

plug

+

-

+

-

Rear 

Left track speaker 

Front    

+

-

+

-

Green

 Purple          

Rear 

 Green/black   

Purple/black  

               Right track speaker

White        

Grey           

         White/black   

Grey/black     Front    

Blue (Radio antenna control)

Orange (CCD)

Red (Key switch/ACC)

Yellow (Battery +)

Black (GND)

Pink (Safety cable)

Blue/White(Remote control for Amplifier)

Rear 

USB/SWC

IPOD

 Bluetooth 

MIC