Инструкция С Настройками для Bolex Paillard C8
Now move the full spool away from the take-up spool until a length of about
6 ins. of film has been unwound.
Insert the index finger of the left. and right hand behind the film, as shown
in the sketch.
6 ins. of film has been unwound.
Insert the index finger of the left. and right hand behind the film, as shown
in the sketch.
To insert the film in the camera
Slip the fu1l
spool onto its spindle and insert the film into the
gate, guiding it
with the left index finger.
The dark, shiny
side of the film must be turned towards you and the
light
side
towards the lens. Slip the take-up spool onto its
spindle
regardless of the position of the notches.
Final check-up
When the spools
and film are in in place, turn the
take-up spool by
hand in order to tighten up the film.
Close the pressure-pad by pushing the lever hack
into position. Then press on the filming button for at
fraction of a second in order to check that the film is
into position. Then press on the filming button for at
fraction of a second in order to check that the film is
drawn correctly through the camera.
Lastly, clone this lid of the camera again and fasten it, by turning the catch
toward ‘F‘.
Lastly, clone this lid of the camera again and fasten it, by turning the catch
toward ‘F‘.
5