Справочник Пользователя для Black & Decker Edger LST136

ADjuStiNG thE hEiGht OF

thE tOOl (FiGuRE h)

CAutiON:

Adjust the

length of the trimmer to obtain

proper working positions as

shown in figure N.

• This tool has a telescopic

mechanism, allowing you

to set it to a comfortable

height.

To adjust the height setting:

• Release the height adjust

locking clamp (h1).

• Gently pull the tube (h2)

up or down to the desired

height.

• Close the height adjust locking clamp (h1).

RElEASiNG thE CuttiNG liNE

In transit, the cutting line is taped to the spool housing.

• Remove the tape holding the cutting line to the spool housing.

OPERAtiNG iNStRuCtiONS

WARNiNG:

Always use proper eye protection that conforms

to ANSI Z87.1 (CAN/CSA Z94.3) while operating this power tool.

WARNiNG:

Remove the battery before making any assembly,

adjustments, or changing accessories. Such preventive safety measures

reduce the risk of starting the trimmer accidentally.

CAutiON:

Before you begin trimming, only use the

appropriate type of cutting line.

CAutiON:

Inspect area to be trimmed and remove any wire,

cord, or string-like objects which could become entangled in the

rotating line or spool. Be particularly careful to avoid any wire which

might be bent outwardly into the path of the tool, such as barbs at the

base of a chain link fence.

SEttiNG thE tOOl tO tRiMMiNG OR EDGiNG MODE

(FiGuRE i, j AND K)

• The tool can be used in trimming mode as shown in figure i or in

edging mode to trim overhanging grass along lawn edges and flower

beds as shown in figure K.

tRiMMiNG MODE

For trimming, the trimmer head

should be in the position shown in

figure i. If it is not:

• Remove the battery from the tool.

• Press and hold the head release

button (i1).

• While holding the auxillary handle,

rotate the head clockwise.

• Release the head release button.

• Lift the edge guide (j1) into the

closed position.

Note: The head will only rotate in one

direction.

CAutiON:

Wire edge guide

should only be used when in the

edging mode. Keep wire edge guide

in the retracted position when in the

trimming mode.

EDGiNG MODE (FiGuRE K)

WARNiNG

When being

used as an Edger, stones, pieces of

metal and other objects can be

thrown out at high speed by the

line. The trimmer and guard are

designed to reduce the danger.

However, MAKE SuRE that other

persons and pets are at least 100

feet (30m) away.

For edging, the trimmer head should be in

the position shown in figure K. If it is not: