Справочник Пользователя для Beko 40WLU550FHID

16

Press the 

MENU button. Move 

to the 

SETUP menu by pressing 

the 

Down movement button in 

the Main Menu and confirm your 

selection with the 

OK button. 

Setup menu will be displayed. 

Select the system in which you 

would like to make the search 

from the 

SYSTEM tab. Move into 

CHANNEL tab by pressing the 

Down movement button. Press OK 

on your remote control to select 

“

S” for cable channels and “C” for 

channels received via the antenna. 

Select 

SEARCH tab using the Up/Down 

movement buttons, and scan the channels 

in ascending order with 

Right movement 

button and in descending order with 

Left 

movement button. If the channel that is 

found is of your liking, select the 

STORE tab. 

Then store it in the memory by pressing the 

Right or Left movement buttons. Repeat 

the same procedure for other channels by 

selecting the program number of your choice 

from the 

PROGRAM NO tab. If the channel 

you found is not of the desired quality and 

requires Fine Tuning or if you would like to 

rename the channel, refer to the relevant 

sections.
6.4.3-Fine Tuning

If the channel you found is not of 

the desired quality and requires 

Fine Tuning, then select the 

TUNE tab by pressing the Down 

movement button in the 

Setup 

menu. Using the 

Left/Right 

movement buttons on your remote 

control, adjust the broadcast 

displayed on the screen to your 

desired quality. Under normal circumstances, 

you will not require to use the Fine Tune 

function. The AFC values of your television 

will automatically adjust and lock themselves 

to the channel. However, you might need 

it in case the television transmitters do not 

operate according to the standards. To store 

in the memory the settings you have made, 

select the 

Store tab and press the Right or 

Left movement button.

To stop the process at any given time, 

please press the 

MENU button. The 

Program Table, which will allow you to sort 

the channels as you wish, will be displayed 

after the automatic search is complete.

Press the 

MENU button. Move to the 

SETUP menu by pressing the Down 

movement button in the Main Menu and 

confirm your selection with the 

OK button. 

Setup menu will be displayed. 

Select the system in which you 

would like to make the search 

from the 

SYSTEM tab. Move into 

CHANNEL tab by pressing the 

Down movement button. Press OK 

on your remote control to select 

“

S” for cable channels and “C” for 

channels received via the antenna. 

Move onto the 

PROGRAM NO tab 

and using the number buttons enter 

the channel number in which you 

would like to have the channel stored. If the 

broadcast viewed on the screen is of your 

desired quality, first move onto the 

STORE 

tab with the down movement button to 

store in the memory the selection you have 

made and store the channel by pressing 

the 

Left or Right movement buttons. The 

prompt 

STORED will be displayed briefly. 

The channel will be stored according to the 

program number of your choice. You can 

tune and store in memory other channels the 

same way. In the event that you wish to exit 

the channel settings menu for any reason, 

simply press the 

EXIT button.