Справочник Пользователя для Beko 40WLU550FHID

28

9.7.1-PC Connection: 
Connect the D-Sub15 connector to the PC-IN socket at the back of your television 

by using an appropriate cable (not supplied with your television). Again, by using 

an appropriate cable, connect the audio output of your PC to the PC AUDIO-IN at 

the back of your television to listen to sounds from your PC and you can adjust the 

volume level of your source by using 

VOL+/VOL- buttons. 

9.7.2-Switching to the PC mode
For your LCD-TV to switch to the monitor (PC) mode, press the 

AV button on your 

remote control. 

SOURCE menu will be displayed. Select PC option by pressing the 

Up/down movement buttons and press the OK button.
9.7.3-PC Setting
Enter into the 

Setup menu from the main menu by pressing the MENU button in 

the PC mode. In order to make the necessary settings in this menu, you can select 

the tabs with the 

up/down buttons on your remote control to make the following 

relevant settings.
9.7.4-AUTOCONFIGURATION
The most suitable geometric settings in accordance with the entry mode are 

configured by this function. For this operation, just select the 

Autoconfiguration 

tab and press 

OK button.

9.7.5-HORIZONTAL POSITION: Horizontal position setting.
9.7.6-VERTICAL POSITION: Vertical position setting.
9.7.7-CLOCK FREQUENCY: This is the pixel clock frequency. User can narrow 

down or enlarge the display by selecting a desired value.
9.7.8-PHASE: Using the right/left movement buttons, you can ensure that the 

colours and shapes are exactly consolidated on the PC image.
9.7.9-PICTURE FORMAT
You can select the PC image to be displayed in 16:9 or 4:3 formats.

Rear view of TV

Picture connection

Sound connection