Справочник Пользователя для Intel Pentium 4 530 3.0GHz HT LGA FSB800 1MB BX80547PG3000E/BOXD915PBLL
Модели
BX80547PG3000E/BOXD915PBLL
Product Description
27
1.8.1
Serial Ports
The Desktop Board can support up to two serial port connectors. Serial port A is located on the
back panel. Serial port B (optional) is accessible using a connector on the component side of
board. The serial ports support data transfers at speeds up to 115.2 kbits/sec with BIOS support.
back panel. Serial port B (optional) is accessible using a connector on the component side of
board. The serial ports support data transfers at speeds up to 115.2 kbits/sec with BIOS support.
For information about
Refer to
The location of the serial port A connector
Figure 15, page 58
The location of the serial port B connector
Figure 16, page 60
The signal names of the serial port B connector
Table 20, page 62
1.8.2
Parallel Port
The 25-pin D-Sub parallel port connector is located on the back panel. Use the BIOS Setup
program to set the parallel port mode.
program to set the parallel port mode.
For information about
Refer to
The location of the parallel port connector
Figure 15, page 58
1.8.3
Diskette Drive Controller
The I/O controller supports one diskette drive. Use the BIOS Setup program to configure the
diskette drive interface.
diskette drive interface.
For information about
Refer to
The location of the diskette drive connector
Figure 16, page 60
1.8.4
Keyboard and Mouse Interface
PS/2 keyboard and mouse connectors are located on the back panel.
✏
NOTE
The keyboard is supported in the bottom PS/2 connector and the mouse is supported in the top
PS/2 connector. Power to the computer should be turned off before a keyboard or mouse is
connected or disconnected.
PS/2 connector. Power to the computer should be turned off before a keyboard or mouse is
connected or disconnected.
For information about
Refer to
The location of the keyboard and mouse connectors
Figure 15, page 58