Инструкции Пользователя для Biostar TForce 6100 AM2
Motherboard Manual
26
CPU Overclock Setting:
CPU Voltage:
This function will increase CPU stability when overclocking. However, the
CPU temperature will increase when CPU voltage is increased.
Choices: The range is from 1.2V to 1.725V, with an interval of 0.0.25V.
Choices: The range is from 1.2V to 1.725V, with an interval of 0.0.25V.
CPU Frequency:
CPU Frequency is directly in proportion to system performance. To
maintain the system stability, CPU voltage needs to be increased also
when raising CPU frequency.
Choices: This range is from 200 to 450, with an interval of 1MHz.
when raising CPU frequency.
Choices: This range is from 200 to 450, with an interval of 1MHz.
Hammer CPU Multiplier:
The MOS allows users to downgrade the CPU ratio when overclocking.
Choices: The lower limit is x4 (800MHz). The upper limit is decided by
different CPU type. With an x1 (200MHz) interval.
Choices: The lower limit is x4 (800MHz). The upper limit is decided by
different CPU type. With an x1 (200MHz) interval.
Memory Overclock Setting:
Memory Voltage:
This function will increase memory stability when overclocking.
Choices: The range is from 1.85V to 2.0V, with an interval of 0.05V.
Choices: The range is from 1.85V to 2.0V, with an interval of 0.05V.
Memclock Frequency:
To get better system performance, sometimes downgrading the memory
frequency is necessary when CPU frequency is adjusted over the upper
frequency is necessary when CPU frequency is adjusted over the upper
limit.
Choices: DDR400, DDR 533, DDR 667, DDR 800 (MHz).
Choices: DDR400, DDR 533, DDR 667, DDR 800 (MHz).
PCI-Express Overclock Setting:
PCIE Clock:
It helps to increase VGA card performance.
Choices: The range is from 100 to 145, with an interval of 1MHz.
Choices: The range is from 100 to 145, with an interval of 1MHz.
Chipset Overclock Setting:
NB/SB Voltage Regulator:
This function will increase chipset stability when overclocking.
Choices: 1.52V, 1.60V, 1.68V, 1.76V.
Choices: 1.52V, 1.60V, 1.68V, 1.76V.
HT Frequency:
We recommend users to set this item at “x4” when overclocking.
Choices: x1, x2, x3, x4, x5, Auto.
Choices: x1, x2, x3, x4, x5, Auto.