Инструкции Пользователя для Biostar P4TDK BIOS

P4TDK BIOS Setup

CPU THRM-Throttling

Select the CPU THRM-Throttling rate.

The Choices: 87.5%, 75.5%, 62.5%, 50.0% (default), 37.5%, 25%, 12.5%.

Wake-Up by PCI card

When you select Enable, a PME signal from PCI card returns the system to Full On state.

The Choices: Enabled (default), Disabled.

Power On by Ring

An input signal on the serial Ring Indicator (RI) line (in other words, an incoming call on
the modem) awakens the system from a soft off state.

The Choices: Enabled (default), Disabled.

Wake Up On LAN

To use this function, you need a LAN add-on card which support power on function. It
should also support the wake-up on LAN jumper.

The Choices: Enabled (default), Disabled.

Resume by Alarm

This function is for setting date and time for your computer to boot up. During Disabled,
you cannot use this function. During Enabled, Choose the Date and Time.

Alarm:

Date (of Month) Alarm

You can choose which month

the system will boot up.

Time (hh:mm:ss) Alarm

You can choose shat hour,

minute and second the system will boot up.

Note:

If you have change the setting, you must let the system boot up
until it goes to the operating system, before this functin will
work.

Reload Global Timer Event

Reload Global Timer Events are I/O events whose occurrence can prevent the system from
entering a power saving mode or can awaken the system from such a mode. In effect, the
system remains alert for anything, which occurs to a device, which is configured as
Enabled, even when the system is in a power down mode.
Primary IDE 0/1
Secondary IDE 0/1
FDD, COM, LPT Port
PCI PIRQ [A-D]#