Инструкции Пользователя для Biostar P4TDP Pro
4
DDR DIMM Modules: DDR1-2
DRAM Access Time: 2.5V Unbuffered DDR 200/266/Fuzzy 333 MHz
Ty pe required (x16 does not support).
DRAM Ty pe: 64MB/ 128MB/ 256MB/ 512MB/ 1GB DIMM Module (184
pin)
Ty pe required (x16 does not support).
DRAM Ty pe: 64MB/ 128MB/ 256MB/ 512MB/ 1GB DIMM Module (184
pin)
DIMM Socket
Location
DDR M odule
Total M emory
Size (MB)
DDR 1
64MB/128MB/256MB/512MB/1GB
*1
DDR 2
64MB/128MB/256MB/512MB/1GB
*1
Max is
2GB
* The list shown above f or DRAM configuration is only f or ref erence.
How to install a DIMM Module
1. The DIMM socket has a
“ Plastic Safety Tab”, and the
DIMM memory module has an
“Asymmetrical notch”, so the
DIMM memory module can only
fit into the slot in one direction.
2. Push the tabs out. Insert the
DIMM memory modules into the
socket at a 90-degree angle, then
push down v ertically so that it will
fit into the place.
3. The Mounting Holes and plastic
tabs should f it over the edge and
hold the DIMM memory modules
in place.
“ Plastic Safety Tab”, and the
DIMM memory module has an
“Asymmetrical notch”, so the
DIMM memory module can only
fit into the slot in one direction.
2. Push the tabs out. Insert the
DIMM memory modules into the
socket at a 90-degree angle, then
push down v ertically so that it will
fit into the place.
3. The Mounting Holes and plastic
tabs should f it over the edge and
hold the DIMM memory modules
in place.