Инструкции Пользователя для Biostar NM70I-1037U

6. Select the proper BIOS file, and a 

message asking if you are sure to 
flash the BIOS file. Click Yes to 
start updating BIOS. 

 

7. A dialog pops out after BIOS flash 

is completed, asking you to restart 
the system. Press the [Y] key to 
restart system. 

 

8. While the system boots up and the full screen logo shows up, press <DEL> key to 

enter BIOS setup. 
After entering the BIOS setup, please go to the Save & Exit, using the Restore 
Defaults function to load Optimized Defaults, and select Save Changes and 
Reset to restart the computer. Then, the BIOS Update is completed. 

1. Installing BIOS Update Utility from the DVD Driver.   
2. Please make sure the system is connected to the internet before using this 

function. 

3. Launch BIOS Update Utility and 

click the Online Update button on 
the main screen.