Инструкции Пользователя для Biostar I945G-M7C
I945G-M7C BIOS SETUP
33
CPU Clock
This item allows you to select CPU Clock, and CPU over clocking.
Min= 100 Max = 300 Key in a DEC number.
The Choices: 100Mhz (default).
Min= 100 Max = 300 Key in a DEC number.
The Choices: 100Mhz (default).
PCIE Clock select
The Choices: Auto(default), Fixed 100, Manual
PCIE Clock
This item will activated only when “ PCIE Clock Select” is set to “ Manual”
The Choices: Min= 100, Max= 200, Key in a DEC number.
Special Notice:
If unfortunately, the system’ s frequency that you are selected is not
functioning, there are two methods of booting-up the system.
The Choices: Min= 100, Max= 200, Key in a DEC number.
Special Notice:
If unfortunately, the system’ s frequency that you are selected is not
functioning, there are two methods of booting-up the system.
Method 1:
Clear the COMS data by setting the JCOMS1 ((2-3) closed)) as “ ON”
status. All the CMOS data will be loaded as defaults setting.
status. All the CMOS data will be loaded as defaults setting.
Method 2:
Press the <Insert> key and Power button simultaneously, after that
keep-on pressing the <Insert> key until the power-on screen showed.
This action will boot-up the system according to FSB of the processor
keep-on pressing the <Insert> key until the power-on screen showed.
This action will boot-up the system according to FSB of the processor
It’s strongly recommended to set CPU Vcore and clock in default setting. If the CPU
Vcore and clock are not in default setting, it may cause CPU or M/B damage.