Инструкции Пользователя для Biostar I915P-A7

I915P-A7

CHAPTER 2: HARDWARE INSTALLATION

2.1 C

ENTRAL

ROCESSING

NIT

(CPU)

Step 1: Pull the lever sideways away from the socket and then raise the

lever up to a 90-degree angle.

Step 2: Look for the black cut edge on socket, and the white dot on CPU

should point wards this black cut edge. The CPU will fit only in the
correct orientation.

Step

2-1:

Special Notice:

Remove Pin Cap before installation, and make

good preservation for future use. When the CPU

is removed, cover the Pin Cap on the empty

socket to ensure pin legs won’t be damaged.

Pin Cap