Инструкции Пользователя для Biostar I915P-A7 Combo
915P-A7 COMBO
1
CHAPTER 1: INTRODUCTION
1.1 M
OTHERBOARD
F
EATURES
A. Hardware
CPU
Supports
LGA
775.
Supports single Intel Pentium 4 / Celeron D processors.
Front Side Bus at the following frequency ranges:
Front Side Bus at the following frequency ranges:
-
533 MT/s (133 MHz Core Clock)
-
800 MT/s (200 MHz Core Clock)
Supports
Hyper-Threading
Technology.
Chipset
Northbridge: Intel 915P.
Southbridge: Intel ICH6.
Southbridge: Intel ICH6.
Dimensions
ATX Form Factor: 29.35cm (L) x 24.4cm (W)
Operating System
Supports Windows 98SE, Windows 2000, Windows Me, and Windows
XP.
System Memory
Supports DDR2 533 memory and up to 2GB physical memory.
Supports DDR333/DDR400 memory and up to 2GB physical memory.
DDR and DDR2 memory space cannot be added together.
Registered DIMMs are not supported.
Supports DDR333/DDR400 memory and up to 2GB physical memory.
DDR and DDR2 memory space cannot be added together.
Registered DIMMs are not supported.
DIMM Socket
Location
DDR/DDR2 Module
Total Memory Size
DDR2_A1 256MB/512MB/1GB
*1
DDR2_B1 256MB/512MB/1GB
*1
Max is 2GB.
DDRA1 256MB/512MB/1GB
*1
DDRB1 256MB/512MB/1GB
*1
Max is 2GB.
DDR Installing Precautions
This system supports both DDR and DDR2 modules.
Please install DDR/DDR2 modules accordingly, or the system may not
Please install DDR/DDR2 modules accordingly, or the system may not
boot up:
-
-
If DDR2 is used for system memory module, install the module
firstly in DDR2_A1, and then DDR2_B1.
firstly in DDR2_A1, and then DDR2_B1.
-
If DDR is used for system memory module, install the module
firstly in DDRA1, and then DDRB1.
firstly in DDRA1, and then DDRB1.
If single DDR2 and single DDR modules are used at the same time, the
system would recognize DDR2 as first priority for system memory.