Инструкции Пользователя для Biostar I865G-M4
I865G-M4
13
JDJ1 (optional): AUDIO DJ Connector
Pin Assignment Pin Assignment
1 SMBDATA
2 SMBCLK
3 INT_B
4 Key
1
5
JDJ1
5 AXT_PWR
OK
JCL1: Chassis Open Header
This connector allows sy stem to monitor PC case open status. If the
signal has been triggered, it will record to the CMOS and show the
message on next boot-up.
signal has been triggered, it will record to the CMOS and show the
message on next boot-up.
Pin Assignment
1
Case open signal
JCL1
2 Ground
JCMOS1: Clear CMOS Header
By placing the jumper on pin2-3, it allows user to restore the BIOS safe
setting and the CMOS data, please carefully follow the procedures to
avoid damaging the motherboard.
setting and the CMOS data, please carefully follow the procedures to
avoid damaging the motherboard.
JCMOS1 Assignment
Pin 1-2 close
Normal Operation (Def ault).
Pin 2-3 close
Clear CMOS data.
※
Clear CMOS Procedures:
1.
Remove AC power line.
2.
Set the jumper to “Pin 2-3 close”.
3.
Wait for five seconds.
4.
Set the jumper to “Pin 1-2 close”.
5.
Power on the AC.
6.
Reset your desired password or clear the CMOS data.