Инструкции Пользователя для Bernina 2500DCET

When using an electrical appliance, basic safety precautions
should always be followed, including the following. Read all
instructions before using this overlock sewing machine.

1. The appliance should never be left unattended when

plugged in.

2. Always unplug this appliance from the electric outlet

immediately after using and before cleaning.

3. Always unplug before relamping. Replace bulb with the

same type rated max.12 volts/5 watts.

1. Do not allow this appliance to be used as a toy. Close

attention is necessary when this appliance is used by or
near children.

2. Use this appliance only for its intended use as described

in this manual. Use only attachments recommended by
the manufacturer as contained in this manual.

3. Never operate this appliance if it has a damaged cord or

plug, if it is not working properly, if it has been dropped
or damaged or dropped into water. Return the appliance
to the nearest authorized dealer or service center for
examination, repair, electrical or mechanical adjustment. 

4. Never operate the appliance with any air openings blo-

cked. Keep ventilation openings of the sewing machine
and foot controller free from accumulation of lint, dust
and loose cloth.

5. Keep fingers away from all moving parts. Special care is

required around the sewing needle and knife.

6. Always use the proper needle plate. The wrong plate can

cause the needle to break.

7. Do not use bent needles.

8. Do not pull or push fabric while stitching. It may deflect

the needle causing it to break.

9. Switch the sewing machine off («O») when making any

adjustments in the needle area, such as threading needle,
changing needle, threading looper, or changing presser
foot and the like.

10. Always unplug the machine from the electrical outlet

when removing covers, lubricating or when making any
other user servicing adjustments mentioned in the
instruction manual.

11. Never drop or insert any object into any opening.

12. Do not use outdoors.

13. Do not operate where aerosol (spray) products are being

used or where oxygen is being administered.

14. To disconnect, turn all controls to the off («0») position,

then remove plug from outlet.

15. Do not unplug by pulling on cord. To unplug, grasp the

plug not the cord.

16. Basically, the machine should be disconnected from the

electricity supply when not in use.

17. This appliance is provided with double insulation (except

USA/CANADA). Use only identical replacement parts. See
instructions for servicing of double insulated products.

In a double-insulated product, two systems of insulation are
provided instead of grounding. No grounding means is
provided on a double-insulated product nor should a means
for grounding be added to the product. Servicing a double-
insulated product requires extreme care and knowledge of
the system and should only be done by qualified service
personnel. Replacement parts for a double-insulated product
must be identical to those parts in the product. A double
insulated product is marked with the words «DOUBLE
INSULATION» or «DOUBLE INSULATED».
The symbol      may also be marked on the product.

This overlock/cover stitch machine is intended for household
use only.

2500_DCE_1_englisch_neu  09.10.2007 14:32 Uhr  Seite 3