Справочник Пользователя для Benq MP510
Operation
32
Shutting down the projector
1.
Press
Power and a prompt message appears. Press
Power a second time to turn the projector off.
2.
The Power indicator light flashes orange and the lamp
shuts down, the fans continue to run for approximately
110 seconds to cool down the projector.
shuts down, the fans continue to run for approximately
110 seconds to cool down the projector.
To protect the lamp, the projector will not respond to any commands during the cooling
process.
process.
3.
If the projector will not be used for a long period of
time, disconnect the power cord from the wall socket.
time, disconnect the power cord from the wall socket.
•
Do not unplug the power cord before the projector
shutdown sequence is complete or during the 110-
second cooling down process.
shutdown sequence is complete or during the 110-
second cooling down process.
•
If the projector is not properly shut down, to protect
the lamp, when you attempt to re-start the projector,
the fans will run for a few minutes to cool down. Press
Power again to start the projector after the fans stop and the Power indicator light turns
orange.
the lamp, when you attempt to re-start the projector,
the fans will run for a few minutes to cool down. Press
Power again to start the projector after the fans stop and the Power indicator light turns
orange.
Are You Sure to Power Off?
Press "Power" again to power off