Справочник Пользователя для Belkin F1DC108C-US
12
Installation
Step 4
Connect the Belkin Dual-Port Micro-Cable Kit for PS/2 to the desired host ports
on the PRO3 KVM Switch. (Refer to diagram below.)
on the PRO3 KVM Switch. (Refer to diagram below.)
6
Step 5
Power up your server.
Step 6
Repeat Steps 1 through 5 for each additional PS/2 server you wish to connect.
Connecting Servers to the LCD Rack Console
(USB Connection):
Step 1
Make sure your server is powered off.
Step 2
Using the Belkin Dual-Port Micro-Cable Kit for USB (F1D9401-XX), connect the
VGA connector to the monitor port on your server. (Refer to diagram on next page.)
VGA connector to the monitor port on your server. (Refer to diagram on next page.)
Step 3
Connect the USB connector to an available USB port on the server. (Refer to
diagram on next page.)
diagram on next page.)