Справочник Пользователя для Beko IDTV 28C769IDS

Make sure the TV and video recorder are both switched off.
Unplug the aerial lead from the TV and plug it into the aerial socket on the video recorder
(if fitted). Plug a coaxial plug into the RF out socket on the rear of the video recorder and
plug the other end into the aerial socket of the TV. Switch on the video recorder and the
TV. If your video recorder has a test signal, switch it on. (Refer to the video recorder user
guide). See ‘Tuning the TV’ and carry out the tuning procedure for the video recorder test
signal. Select a programme number 0 or between 55 and 99.

If you have an S-Video player you can connect it to SCART socket 2 via an adaptor from
scart  to S-Video/PHONO audio (not supplied). Press the 

 button three times to select

AV2S (available for two scart models).

You can also connect it through the S-Video socket of the TV (Model dependant).
Plug the S-Video plug into the S-Video socket and the audio leads into the audio sockets.
Press the 

button  repetitively to select AV3S for two scart models or AV4S for three

scart models.

R

L

MONO

VIDEO

R

L

MONO

VIDEO

R

L

AUDIO OUT

AV1

AV2

AV3