Справочник Пользователя для Beko INTEGRATED DIGITAL HD READY COLOUR TELEVISIONS 32WLU530HID

Start

Remove your television carefully from its box.

You can keep the packaging of your television

to use in future.
Contents of the box

Power cable

Remote control

2 batteries

Note: Scart, HDMI, VGA and PHONO

cables are not supplied with the device.

4.1-Aerial connection

4.2-Powering on your device

and the initial use

1. Insert the power cable into the power

supply input located on the back panel of the

LCD TV.

2. Insert the power cable plug supplied with

the tv into the mains socket.
Note: Your TV is equipped to operate with

TV buttons in case your R/C is broken or the

batteries are exhausted.

3. Press the power on/off button

located on the LCD TV.

4. To power on your television,

press

PR+ or PR- keys on the

remote control. For this process,

you can also use the buttons on

your TV. The picture will appear on

the screen after a short while.

Note: If you are not going to use your

television for a long time, unplug its power

cable from the socket.

4.3-Performing initial start and

settings

To set up your television, read the sections

on the TV controls and making the channel

settings.

4.4-Batteries

Open the lid of the battery compartment

and make sure that you have placed the

batteries in the correct direction. For this

remote control, UM-4, IEC R03 or AAA 1.5 V

batteries are suitable.

Do not throw your old batteries into the fire,

discard them in a dedicated waste area for

this purpose.
Do not mix used batteries with new ones or

different types of batteries together.
The performance of the remote control will be

reduced at a distance of 8 meters from or at

an angle of 30 degrees beyond the centre of

the TV.