Справочник Пользователя для Beko 32WLU550FHID

7

Not 1: Your TV will switch to the STANDBY 

mode in five minutes if there is no broadcast 

signal from the aerial.

Note 2: Your TV is equipped to operate with 

TV buttons in case your remote is broken or 

the batteries are exhausted.

3. To power on your television, 

press any numerical key or 

PR+ or 

PR- keys on the remote control. 

For this process, you can also use 

the buttons on your TV. The picture 

will appear on the screen after a 

short while.

Remove your television carefully from its 

box. You can keep the packaging of your 

television to use in future.
Contents of the box

Power cable

Remote control

2 batteries

1. Insert the power cable into the power 

supply input located on the back panel of 

the LCD TV.

2. Insert the power cable plug supplied with 

the device into the mains socket.

Note:  If you are not going to use your 

television for a long time, unplug its power 

cable from the socket.

To set up your television, read the sections 

on the TV controls and making the channel 

settings.

Open the lid of the battery compartment 

and make sure that you have placed the 

batteries in the correct direction. For this 

remote control, UM-4, IEC R03 or AAA 1.5 V 

batteries are suitable.

Do not throw your old batteries into the fire, 

discard them in a dedicated waste area for 

this purpose.
Do not mix used batteries with new ones or 

different types of batteries together.
The performance of the remote control will 

be reduced at a distance of 8 meters from or 

at an angle of 30 degrees beyond the centre 

of the TV.