Справочник Пользователя для Beko 37WLU550FHID

10

You can adjust the volume of your 

television by using the 

VOL+/VOL- 

buttons on your remote control.

Press the 

MENU button. The Menu 

including all the setting menus will 

appear on the screen. Navigate 

through the Menu titles with the 

Up/Down movement buttons and 

press the 

OK button to select the 

desired menu. If you want to exit 

the menu in any step, just press the 

EXIT 

button. Press 

BACK or MENU buttons to 

return to the previous Menu while you are in 

a sub menu.

To temporarily mute the sound of 

your television, press the 

MUTE 

button on your remote control. 

In that case, 

MUTE symbol will 

appear on the screen. When you 

press the same button a second 

time, the sound will be restored. If you press 

the 

VOL+ button while in the Mute mode, 

the sound level is increased and the Mute 

function is aborted.

Allows you to switch between the 

current program you watch and 

the last selected program. For 

example, if you change the channel 

to Program 11 while you were watching 

Program 1, press 

SWAP button to switch 

back to Program 1. Press 

SWAP button to 

switch back to Program 11 again.

When you press the red 

BY button located on the upper left 

hand side of your remote control 

while your television is switched 

on, the sound and the picture will 

go off. In the stand-by mode, the 

power indicator of your television 

will glow brighter. To switch your 

television back on, either press 

any numeric button or 

PR+/PR- 

buttons.

Caution!  If you are not going to use your 

television for a long time, unplug its power 

cable from the socket.

You may select whichever program 

number you would like by pressing 

the 

PR+/PR- buttons located on 

your television and your remote 

control. To select the programs 

that are above 9, you can use 

the Numerical buttons. You may 

enter the number of the program 

you would like to select using the 

numerical buttons. For example, 

to switch to the program number 

12, press respectively the numeric 

buttons 1 and 2 on your remote 

control. You can perform the program 

selection also from the Program Table.

Press the 

AV button on your remote 

control. 

SOURCE menu will be 

displayed. Select 

ANALOG TV or desired AV mode 

from the Source menu with 

Down movement buttons and 

confirm with 

OK button so that your 

television will switch to the source 

you have selected.