Справочник Пользователя для Beko 40WLU530HID

7 

Note1:Your TV does not have a seperate 

on/off switch, therefore to switch the power 

completely off (i.e. not on standby), switch 

off or unplug the TV at the mains 

socket.

Note2: Your TV is equipped to 

operate with TV buttons in case 

your R/C is broken or the batteries 

are exhausted.

3. Press the power on/off button 

located on the LCD TV.

4. To power on your television, 

press any numerical key or 

PR+ 

or 

PR- keys on the remote control. For 

this process, you can also use the buttons 

on your TV. The picture will appear on the 

screen after a short while.
Note:  If you are not going to use your 

television for a long time, unplug its mains 

lead from the socket.

To set up your television, read the sections 

on the TV controls and making the channel 

settings.

Open the lid of the battery compartment 

and make sure that you have placed the 

batteries in the correct direction. For this 

remote control, UM-4, IEC R03 or AAA 1.5 V 

batteries are suitable.

Do not throw your old batteries into the fire, 

discard them in a dedicated waste area for 

this purpose.
Do not mix used batteries with new ones or 

different types of batteries together.
The performance of the remote control will 

be reduced at a distance of 8 meters from or 

at an angle of 30 degrees beyond the centre 

of the TV.

Remove your television carefully from its 

box. You can keep the packaging of your 

television to use in future.
Items supplied with your television:

Instruction Manual

Mains lead

Remote control

2 Batteries

If you use a 75 Ohm coaxial cable (round 

cable) as an aerial cable, connect the aerial 

plug directly to the aerial input located on the 

TV.

Motorized vehicles, energy lines and 

telecommunication lines affect your aerial. 

Therefore, be careful to install your aerial 

away from these and metal surface in such 

a way that it shall not move. Do not make 

your aerial cable longer than required and do 

not coil it. Make sure that it is not crimped 

passing through a window or door. Your 

aerial and cable might be affected by natural 

phenomena such as rain, wind, smoke and 

humidity over time. Periodically check your 

aerial and equipment.

1. Insert the mains lead into the power supply 

input located on the back panel of the LCD 

TV.

2. Insert the mains lead plug supplied with the 

TV into the mains socket.