Справочник Пользователя для Behringer Portable Speaker X2222USB

XENYX X1622USB/X1832USB/X2222USB/X2442USB User Manual

behringer.com

The packaging of your mixing console contains two 19" rack mounts for 

installation on the side panels of the console.
Before you can attach the rack mounts to the mixing console, you need to remove 

the screws holding the left and right side panels. Then, use these screws to 

fasten the two rack mounts, each specifically to one side. With the rack mounts 

installed, you can mount the mixing console in a commercially available 19" rack. 

Be sure to allow for proper air flow around the unit, and do not place the mixing 

console close to radiators or power amps, so as to avoid overheating.

You will need a large number of cables for the various connections of the console. 

The illustrations below show the wiring of these cables. Be sure to use only 

high-grade cables.

Foot switch connector

Fig. 6.1: 

6.2.1  
Please use commercial RCA cables to wire the 2-track inputs and outputs.
You can, of course, also connect unbalanced devices to the balanced 

input/outputs. Use either mono plugs, or use stereo plugs to link the ring 

and shaft (or pins 1 & 3 in the case of XLR connectors).

XLR connections

Fig. 6.2: 

¼" mono plug

Fig. 6.3: 

The footswitch connects both poles momentarily

For unbalanced use, pin 1 and pin 3 have to be bridged

1 = ground/shield
2 = hot (+ve)
3 = cold (-ve)

1

2

3

1

2

3