Справочник Пользователя для Beko 19WLP530HID

-11-

Helpdesk: 0845 600 4911

2.8

Basic Television Controls

Before using your television, please refer to Section 3 for information on first time use

and automatic tuning.
Note 1: The sequence of operation of the Remote Control keys is illustrated on the

left side of the page for each function described in this section.

Note 2: The operations detailed in this section are described using the buttons of the

Remote Control.

2.8.1 Temporary on/off (STAND-BY)

When you press the red

STANDBY button located on your remote control while your

television is switched on, the sound and the picture will go off. In the stand-by mode,

the power indicator of your television will glow brighter. To switch your television back

on, either press any numeric button or

P+/P- buttons.

Caution! If you are not going to use your television for a long time, unplug the

mains lead from the mains.

2.8.2 Digital TV, Analogue TV and AV Mode selection

Press the

Source button on your remote control. AV menu will be displayed. Select

DTV(Digital TV), ATV (Analogue TV) or desired AV mode from the Source menu with

up/down movement buttons and confirm with OK button so that your television will

switch to the source you have selected.

2.8.3 Channel Selection

You may select program number you would like by pressing the

P+/P- buttons on

your television and on your remote control. To select the programs that are above

9, you can use the Numerical buttons. You may enter the number of the program

you would like to select using the numerical buttons. For example, to switch to the

program number 12, press the numeric buttons 1 and 2 on your remote control. You

can perform the program selection also from the Program Table and Channel List

menus.

2.8.4 Temporary sound mute (MUTE)

To temporarily mute the sound of your television, press the

MUTE button on your

remote control. The

MUTE symbol will appear on the screen. When you press

the same button a second time, the sound will be restored. If you press the

VOL+

button while in the Mute mode, the sound level is increased and the Mute function is

aborted.

2.8.5 Returning to the Last Viewed Program (SWAP)

Allows you to switch between the current program you are watching and the source,

or the last selected program and the source. For example, if you change the channel

to Program 11 while you were watching Program 1, press

SWAP button to switch

back to Program 1. Press

SWAP button to switch back to Program 11 again.