Справочник Пользователя для Beko 19WLP530HID

-32-

Helpdesk: 0845 600 4911

Your TV supports HDCP feature. To use this feature, you must set up a connection to 

your TV set’s HDMI video port and select HDMI by pressing the SOURCE button on 

your remote control.
NOTE:In HDMI mode; some resolutions are supported when a DVI to HDMI converter 

cable from a PC is used. Only 16:9, 4:3, 14:9 (some definitions) are supported as 

picture format.

Your television can receive high-definition signals (HDTV). You can connect the input 

sources (HDTV set-top box or HDTV DVD player) to the (HDMI) socket (digital HDTV 

signal). This ensures that you can view digital HDTV programs, even if they are copy-

protected (HDCP High-Definition Copy Protection).

Rear view of the TV

Picture connection

Audio connection

For your LCD-TV to switch to the monitor (PC) mode, press the 

AV button on your 

remote control. 

SOURCE menu will be displayed. Select PC by pressing the Up/

Down movement buttons and press the OK button.

Enter into the 

SETUP menu from the Main Menu by pressing the MENU button in the 

PC mode. In order to make the necessary settings in this menu, you can select the 

headings with the 

Up/Down buttons on your remote control to perform the following 

monitor-related settings.

The most suitable geometric settings in accordance with the entry mode are 

configured by this function. For this operation, just select the  

Autoposition tab and 

press 

OK button.

Horizontal position setting.

Vertical position setting.

Connect the D-Sub15 connector to the 

PC-IN socket at the back of your television 

by using an appropriate cable (not supplied with your television). Again, by using 

an appropriate cable, connect the audio output of your PC to the 

PC AUDIO-IN at 

the back of your television to listen to sounds from your PC and you can adjust the 

volume level of your source by using 

VOL+/VOL- buttons.