Справочник Пользователя для Bay Technical Associates 350
Using the BayStack 350 10/100 Autosense Switch
2-4
893-00992-B
Software
Verify that you have the software components appropriate for your method of
installation:
installation:
•
BootP server: The BayStack 350 switch can learn its IP address through
BootP. To use this feature, ensure that you have a properly configured BootP
server in your network.
BootP. To use this feature, ensure that you have a properly configured BootP
server in your network.
•
TFTP server: You can keep your BayStack 350 switch firmware up-to-date
by upgrading the firmware as new versions become available. To upgrade the
firmware, you need a properly configured TFTP server in your network.
by upgrading the firmware as new versions become available. To upgrade the
firmware, you need a properly configured TFTP server in your network.
The Bay Networks network management applications EZ LAN
™
, Optivity
Campus
™
, and Optivity Enterprise
™
can help you with these BootP and firmware
functions.
Environment
The following items must conform to the specifications described in Appendix A,
“Technical Specifications”:
“Technical Specifications”:
•
Temperature: Ensure that the temperature in the operating environment
remains between 0
remains between 0
o
and 40
o
C (32
o
and 104
o
F). Do not place the BayStack
350 switch in direct sunlight or near warm air exhausts or heaters.
•
Humidity: Ensure that the humidity level in the operating environment does
not exceed 85 percent and that no water condenses on or around the BayStack
350 switch.
not exceed 85 percent and that no water condenses on or around the BayStack
350 switch.
•
Ventilation: Ensure that there is adequate airflow and clearance for air
circulation around the BayStack 350 switch. Air enters the switch on one side
and flows out the opposite side. Allow at least two inches of ventilation space
on both sides of the BayStack 350 switch.
circulation around the BayStack 350 switch. Air enters the switch on one side
and flows out the opposite side. Allow at least two inches of ventilation space
on both sides of the BayStack 350 switch.
•
Electrical power: Ensure that the site’s power outlet meets the power
requirement of the BayStack 350 switch and is within 1.8 meters (6 feet) of
the installation location.
requirement of the BayStack 350 switch and is within 1.8 meters (6 feet) of
the installation location.
350fbk.book Page 4 Wednesday, July 9, 1997 4:51 PM