Справочник Пользователя для Barco Projector 26-0313000-00

Router Interface Notes

 to be entered.  The Controller does this automatically when attempting to 

connect to the router by using the default factory account. 

To ensure that a connection is successful, verify that the Leitch Router has the following 
User Name and Password account:

:  leitch

:  leitchadmin

Refer to the router "Installation, Configuration, and Operation Manual" for more 
information on how to create user accounts.  The manual will also describe how to properly 
change the IP address of the router. This will be necessary in order to set the router to a 
compatible static IP address.

In the Router Setup Menu, FSR has been added to the list of manufacturers that can be 
selected.  The Pathfinder series of routers can be connected to Encore via serial or 
Ethernet.  

When using a serial connection, the cable type must be a NULL modem. 

When connecting via Ethernet, ensure that the router’s IP address is in the 
192.168.0.xxx

 range, in order to be compatible with the Encore network.

In the Router Setup Menu, AUTOPATCH has been added to the list of manufacturers that 
can be selected.  Connection to these routers can be made with a direct straight through 
serial cable to the Encore Controller’s EXT COMM port.  Ethernet connection is only 
supported via the Lantronix device.  Please note:

When using AutoPatch routers with Encore, only Level 0 of the router will be 
used.  In addition, only one connection type can be used with the system (Analog, 
SDI or DVI). 

The controller can not be configured to access mixed configurations that the 
AutoPatch router series is capable of providing.