Справочник Пользователя для Barco MIVD 1218

 

User manual MIVD 1218 

 

19 

Note: 
The calibration of the video levels determines the calibrated position 
or default setting of contrast and brightness. The black level 
calibration determines the brightness, the white level calibration 
determines the contrast. 
 

3.5. Getting information 

The Information menu allows you to get a lot of information about the 
display and the connected signals. 
 
To read the information: 
1  Turn the control wheel to display the Information menu. 

2  Click the control wheel to enter the menu. 
3  Turn the control wheel to select one of the categories: General or 

Timing. 

4  Click the control wheel to enter the selected information menu. 
5  Turn the control wheel to scroll through the information. 

General information 

Input .........................Displays the currently selected input: analog 

composite video or DVI (digital) 

Current Mode ...........Displays the currently selected memory scan 

mode 

ALC ..........................Displays if the Ambient Light Compensation 

(ALC) is on or off. A check mark (3) means on, 
a cross (2) means off 

Power Led ................Displays if the power LED on the front is 

currently switched on or off. A check mark (3) 
means on, a cross (2) means off 

Interlaced* ................Indicates if the display is processing the 

selected input signal in interlaced or non-
interlaced mode. A check mark (3) means 
Interlaced, a cross (2) means non-interlaced 

Filter* ........................Displays which internal low-pass filter is 

currently selected 

Serial #. ....................Indicates the display serial number 
SW ...........................Displays the current internal software version 

***MAIN MENU**** 
Information