Справочник Пользователя для Burnham Indirect - Fired Water Heater AL SL

U.S Boiler Company, Inc. – Burnham Hydronics (herein called the Company) intends that this Alliance SL™ 

Indirect-Fired Water Heater be used as a separate zone to a heating system boiler.

This appliance is designed to heat water by circulating water from the boiler through the internal coil in the 

tank.  We specifically do not warrant this tank for high temperature applications such as wood stoves or 

steam producing systems.  Such use of this product will automatically void the warranty.

The design anticipates the proper installation and care in use of the product.  There is risk of property dam-

age and personal injury inherent in the use of any hot water system.  The Company cannot supervise the 

installation and therefore makes it a specific condition of the warranty that the customer will supervise the 

installation and use of this product to be sure they are performed in accordance with safe guidelines and 

proper local or national codes.

Generalized instructions and procedures cannot anticipate all situations.  For this reason, only qualified 

installers should perform the installation.  A qualified installer is a person who has licensed training and a 

working knowledge of the applicable codes, regulations, tools, equipment and methods necessary for safe 

installation of a boiler system and an indirect water heater.

An installation checklist has been provided to help the customer ensure that all procedures for a safe instal-

lation have been followed.

If questions regarding installation arise, check with your local plumbing and electrical inspectors for proper 

procedures and codes.  Local codes take a precedent over instructions in this manual.

27

39.25

20.00

170

192

162

0.97

35

39.25

22.75

198

200

162

0.72

50

40.75

26.00

248

225

171

0.56

70

45.75

28.00

300

294

217

0.45

119

67.75

26.00

480

339

235

0.39

Domestic Water Inlet / Outlet = 3/4”M  —  T&P Valve = 3/4”F 

Boiler Water Supply / Return = 3/4”M  —  except AL 119SL = 1.0”M