Справочник Пользователя для Bixolon SRP-770II

 

 
 
The self-test checks whether the printer has any problems. 
(Users cannot perform this procedure if using the printer’s label peel-off option.) 
If the printer does not function properly, contact an authorized dealer. 
 
 
The self-test checks the following; 
 
1) Make sure that the paper roll has been installed properly. 
 
2) Turn on the power while holding down the FEED button.    The self-test begins. 
 
3) The self-test prints the current printer status, which provides the control ROM version 

and the DIP switch settings. 

 
4) After the self-test results are printed out: 

 

 

- No button input within 2 seconds: Normal Print Mode 

 

- Button pressed once within 2 seconds: Hex Dump Mode 

 

- Button pressed twice within 2 seconds: Line Print Mode 

 

 

* The ESC-POS command set is used in Line Print Mode. 

 

Received data is printed in sequence similar to a receipt printer. 

 

 

* If it is necessary to set the line mode as the default mode when power is on, 

please turn on the dip switches 1-6 and 2-8 together. 

           

 

 

 

ON