Инструкции Пользователя для Benq W7000+

  37

  Connecting with video equipment

The On-Screen Display (OSD) menus can be set according to your preferences. The following settings do 
not affect the projection settings, operation, or performance. 

•  Menu Display Time in the System Setup > Menu Settings menu sets the length of time the 

OSD will remain active after your last key press. Use  /  to select a suitable time length.

•  Menu Position in the System Setup > Menu Settings menu sets the OSD position in five 

locations. Use  /  to select a preferred position.

•  Language in the System Setup menu sets your familiar language for the On-Screen (OSD) Menus. 

See 

 for details. 

•  Splash Screen in the System Setup menu sets a preferred logo screen to be displayed during 

projector start-up.

Locking control keys

With the control keys on the remote control and projector locked, you can prevent your projector 
settings from being changed accidentally (by children, for example). When Key Lock is on, no control 
keys on the remote control and projector will operate except POWER ON/OFF and  .

To lock the keys:
1. Press MENU and then press  /  until the Advanced Setup 

menu is highlighted.

2. Press  

to 

highlight 

Key Lock, and press  /  to select On. A 

warning message appears. Select Yes and press ENTER. The control 
keys lock.

To unlock the keys, press and hold   on the projector or remote 
control for 3 seconds.

Turning the projector off

To turn the projector off, press POWER OFF on the remote 
control to turn the projector off directly. Or you can press   on 
the projector and a warning message appears. Press   again.

•  The Power indicator light flashes orange and the fans run for 

about two minutes to cool the lamp. The projector will not 
respond to any commands until the cooling process is complete.

•  Then, the Power indicator light is a steady orange once the 

cooling process has finished and fans stop.

•  If the projector will not be used for an extended period, unplug 

the power cable from the power outlet.

•  To protect the lamp, the projector will not respond to any 

commands during the cooling process.

Press 

 button again to power 

off.