Справочник Пользователя для Bay Technical Associates BayTech DS62
DS62-Network, DS62-MD4 Network/Modem Host Module
9
Figure 1
Select option ‘C’ for the configuration menu. Select the DS62 module option and the following menu
is displayed:
Figure 2
is displayed:
Figure 2
DS-Series - F 2.10.05 (C) 2005 Bay Technical Associates
Module Name: DS62
Module: 1
Attention Character: ;
Device A (2, 1).........1
Device B (2, 2).........2
Device C (2, 3).........3
Device D (2, 4).........4
DS-DS (5, 1).........5
Status..........................S Current configuration
Configure.......................C Make Changes
Unit Reset......................RU Resets the DS-Unit, terminates internal &
Module Name: DS62
Module: 1
Attention Character: ;
Device A (2, 1).........1
Device B (2, 2).........2
Device C (2, 3).........3
Device D (2, 4).........4
DS-DS (5, 1).........5
Status..........................S Current configuration
Configure.......................C Make Changes
Unit Reset......................RU Resets the DS-Unit, terminates internal &
external modem connections, allow 10
seconds
for
reset.
Logout..........................T
Enter Request :c
Enter Request :c
Copyright(C) Bay Technical Associates 2006
DS62 Ethernet Host module
Revision F 2.10.05 Module 1
Hardware 1.01 Serial number 509 colilo version 1.05.01
Status..........................1 Current setting of the module
Serial Port Configuration.......2 Setup the port configuration menu
Serial Port Device Name.........3 Name the port
Attention Character.............4 Pressing the attention character 5
DS62 Ethernet Host module
Revision F 2.10.05 Module 1
Hardware 1.01 Serial number 509 colilo version 1.05.01
Status..........................1 Current setting of the module
Serial Port Configuration.......2 Setup the port configuration menu
Serial Port Device Name.........3 Name the port
Attention Character.............4 Pressing the attention character 5
consecutive times will return back to the
main
menu.
Disconnect Timeguard............5 If more data is received within the delay
period, the DS series treats the
character as data, not an attention
character; thereby preventing unwanted
port
disconnection.
Connect Port ID Echo............6 Enable port echo by name or module&port#
Login Setup.....................7 Login menu Access/Users/Direct Port
Login Setup.....................7 Login menu Access/Users/Direct Port
Connection/Radius/TACACS
Network Port Configuration......8 Network Setup IP Address
Module Name.....................9 Enter a name for the module
DS Management..................10 Set up Voltage/Current/Sensor thresholds
Firmware / Config Download.....11 Updates by FTP & Reset to Factory Config
Exit.........................X,CR
Enter Request :
Module Name.....................9 Enter a name for the module
DS Management..................10 Set up Voltage/Current/Sensor thresholds
Firmware / Config Download.....11 Updates by FTP & Reset to Factory Config
Exit.........................X,CR
Enter Request :