Справочник Пользователя для Barco Laser Pointer 26-0405000-00

Setting up the Background

With PresentationPRO-II, you can use the DVI input, a matte color, or a still frame as the 
background source.  Please note:

The system has one DVI connector (

BG/DSK) that can be used for either the 

Background or the DSK — but not both simultaneously.  

The 

BG/DSK input (along with a scaled PIP image) is the source of still frames 

that can be captured and used as the background.

The function of the 

BG/DSK input is determined by the “Mode” line on the BG/

DSK Input Setup Menu.  When set to BG, the background setup procedures 
outlined below apply.

Select the procedure below for the type of background that you wish to set up:

The EDID (Extended Display Identification Data) programming procedure is a prerequisite 
for using a live DVI background or for using the DSK.  The procedure guarantees proper 
communications at the preferred resolution between PresentationPRO-II’s DVI input and 
your external computer. 

„

Use the following steps to program the PresentationPRO-II EDID:

1.  Ensure that the PresentationPRO-II output format matches your projector’s native 

resolution.  Refer to the “

” section on page 88 for instructions.

2.  Ensure that the computer (or external equipment) that you wish to use as a 

background source is capable of supporting the selected output resolution.

3.  From the HOME MENU, press {SYSTEM} > {EDID} to display the EDID DVI Input 

Format Menu.

4.  Note the Current line, which displays the current EDID video format that resides 

in PresentationPRO-II memory.  If this format is already set to the desired 
resolution, no EDID programming is required.  You can exit this procedure, and 
continue with other background setup steps as needed.

5.  If a new resolution is required, use the ADJ knob to adjust the Format to the 

preferred setting at which you want to program the EDID.  

6.  Press {PROGRAM EDID} to program EDID with the new selected video format.  A 

warning message will be shown.  Press {

YES} to continue.

7.  Once EDID programming is complete on PresentationPRO-II, power down the 

external computer and power it back on.  

8.  On your PC’s desktop, right-click to display the Display Properties Window.  

9.  Select the Settings Tab, and set the resolution to match that which you just 

programmed into EDID.