Справочник Пользователя для Barco Laser Pointer 26-0405000-00

Setting up the LOGO

With PresentationPRO-II, you can set the 

LOGO source as a captured still frame, or leave 

it as 

Black (the default setting upon factory reset).  You can also change which source you 

use during live production.

„

Use the following steps to set up the 

LOGO source:

1.  Ensure that the background input is properly set up as a DVI source.  This input 

(along with scaled PIP images) is the source of still frames that you can capture.  
Refer to the “

” section on page 94 for 

setup details.

2.  In Chapter 6, refer to the “

” section on page 117 for 

instructions on capturing still frames.  Up to three frames can be captured: 

FG_1, 

FG_2 and FG_3.

3.  In the Layer Functions Section, press the LOGO button.  The button blinks and 

the 

LOGO Input Setup Menu appears.   

4.  On the Type line, select the desired still frame (FG_1, FG_2 or FG_3), or select 

Black.    

Please continue with the “

” section on page 98.

When all system setup procedures have been completed:

1.  From the Home Menu press {SYSTEM} to display the System Menu.  

2.  Press {SAVE} to save all settings in the system file.

Once pressed, the Touch Screen menu reads “

Saving System Configuration.”  This step 

ensures that when you cycle power, the PresentationPRO-II returns to the state in which it 
was configured at the time of the “save.”

Because the

 LOGO is the highest priority layer and 

downstream of all other effects, the “black” source can serve 
as a convenient way to fade all effects to black.