Справочник Пользователя для Barco Laser Pointer 26-0405000-00
PresentationPRO-II • User’s Guide
107
6. Operations
Working with Layers
jçÇáÑóáåÖ=hÉóë=~åÇ=aphë
Use the following steps to modify a Key or DSK:
S
Assumption: A Key (or DSK) is currently on Program.
1. Use one of two methods to access the key adjustment menus:
~
For a
Key
— In the
Layer Functions Section, press KEY to activate the
current Key for modification. The
Key Menu appears.
~
For a
DSK
— Press
BG/DSK to display the BG/DSK Input Setup Menu
appears. Then press {
KEY} to display the DSK Adjustment Menu.
2.
Clip, Gain, Mode, Opacity
— Use the controls to adjust clip, gain, invert mode
and opacity. In Chapter 4:
~
Refer to the "
" section on page 66.
~
Refer to the "
" section on page 78.
3.
Fill Source
— Use the controls in the
Key Menu to select a self or matte fill key.
If
Matte is selected, press {MATTE} to display the Matte Menu, with which you
can choose the matte fill color. In Chapter 4, refer to the "
" section
on page 68 for menu details.
S
For a
Key
only:
4.
Size and Position
— From the
Key Menu, press {SIZE & POS} to display the
Key Adjustment Menu. Use the controls to size and position the Key. In
Chapter 4, see the "
Chapter 4, see the "
" section on page 69 for menu details.
5.
Crop
— From the
Key Menu, press {CROP} to display the Crop Adjustment
Menu. Use the menu to select the type of crop, the aspect ratio, and the image’s
H and V size. In Chapter 4, refer to the "
H and V size. In Chapter 4, refer to the "
" section on page 61 for
menu details.
6.
Source Size
— From the
Crop Menu, press {SRC} to display the Key Source
Adjustment Menu. Use the menu to adjust the source image’s size and position
within the PIP. In Chapter 4, refer to the "
within the PIP. In Chapter 4, refer to the "
" section on page 72 for menu details.
7.
Special Effects
— From the
Matte Menu, press {EFX} to display the Image
Effects Menu. Use the menu to select monochrome or color mode, to modify
chroma and hue, to invert the color, and to set a strobe effect. In Chapter 4, refer
to the "
chroma and hue, to invert the color, and to set a strobe effect. In Chapter 4, refer
to the "
" section on page 63 for menu details.
8.
Global Functions
— Remember that the following global functions are always
available to you:
~
Press
Reset to reset the current effect to a default value.
~
(For a
Key
only) Press
Full Screen to bring the Key to full screen, using
the source’s height as the defining factor.
~
Press
Freeze to freeze the Key. Press again to unfreeze.
S
For a
Key
and a
DSK
:
9.
Transition
— Transition the new "look" to program with a
MIX or WIPE. Refer to
the “
“ section on page 115 for details.
Note
Because the Key is on Program, it is recommended that you
make slow, smooth adjustments during a live production.
make slow, smooth adjustments during a live production.