Инструкции Для Сборки для West Elm Modular Wall Shelf

page 1 of 1

mounting instructions

1.  Hold shelf at desired location. With a pencil, mark on wall the
     top outside corners. These marks will be used to determine
     the location of your mounting hardware.

2.  Measure down from the top of the shelf to the top of both
     keyhole notches. Record these measurements on the wall,
     using the marks in step one as a guide.

3.  Measure in from the side of the shelf to the top of both keyhole
     notches. Again, record these measurements on the wall. Align
     the two measurements until they intersect. This is the insertion
     point of your mounting hardware. Use a carpenter’s level to
     ensure the item will be level.

4.  Insert screws into wall, leaving approximately 1/2” between the
     back of the screw head and the wall.

5.  Align keyhole notches over the screw heads.

6.  Slide shelf down until the top of the keyholes rests on the
     screws. Tighten or loosen screws as needed to fit item snugly
     against the wall.

4-5

6

:  modular wall shelf

  Stud mounting recommended. Use proper hardware for your wall type (such as plastic anchors for drywall). When in doubt,

   consult your local hardware store. For your safety, assembly by two people is strongly recommended.

  Designed to be used for decorative items only.

  This shelf can be mounted in two different orientations.

  Wipe with a soft, dry cloth. Avoid cleaners and abrasives as they may damage the finish.

1

2

3

6092779- 9/02