Справочник Пользователя для Woodstock W1099
- 6 -
Woodstock Intl., Inc. W1099
VIII. ADJUSTMENT LOCATIONS
1. The hand levers clamp your workpiece in
place.
2. The fence knobs hold the fence in place.
Loosen these knobs to adjust fence position.
Router travel is stopped when the router base
contacts the fence.
Router travel is stopped when the router base
contacts the fence.
3. The upper side stops align the workpiece
horizontally under the template.
4. The front side stops align the vertical work-
piece to the horizontal workpiece.
5. The template knobs hold the template in
place. Loosen these knobs to adjust template
position.
position.
6. The clamping pressure knobs control the
height of the clamping bar and adjust cam
clamping pressure.
clamping pressure.
Hand Lever
Fence Knob
Clamping Pressure Knob
Template Knob
Hand Lever
Clamping Pressure Knob
Figure 4 shows the adjustment locations for the dovetail jig.
Upper Side Stops
Front Side Stops
When describing adjustments and operations
in this manual, reference is made to the pieces
being joined as fronts, backs or sides. These
pieces indicate drawer fronts, backs, and sides.
in this manual, reference is made to the pieces
being joined as fronts, backs or sides. These
pieces indicate drawer fronts, backs, and sides.
Front and back pieces mount horizontally on top
of the jig and side pieces mount vertically in the
front of the jig. The insides of the boards always
face out!
of the jig and side pieces mount vertically in the
front of the jig. The insides of the boards always
face out!
The W1099 Dovetail Jig has been designed to accommodate various stock thicknesses and router base sizes.
Figure 4 shows the locations for all necessary Dovetail Jig adjustments.
Figure 4 shows the locations for all necessary Dovetail Jig adjustments.