Справочник Пользователя для Woods Equipment CZ1736K

1.  Remove cutterdeck belt (see cutterdeck belt 

replacement).

2.  Disconnect wire I at clutch M.  Remove bolts J 

and remove torque restraint.

3.   Using a ratchet with a 9/16" socket, place over 

nut at location P.  Use the ratchet to rotate it 
enough to remove the transaxle drive belt.

4.   Install a new transaxle drive belt by performing 

these steps in reverse order.

5.  Inspect the fans.  Replace if worn or damaged.                                                                                   

Torque transaxle pulley nut to 28.3-41.6 ft-lbs 
(38-56 Nm). 

6.  Reinstall cutterdeck belt (see cutterdeck belt 

replacement).