Справочник Пользователя для Toshiba 19AV615DB
English
21
TUNING THE TELEVISION
Channel Decode
Channel Decode support the Canal+ (paid
television channel); however, the channel also
broadcast some un-encrypted programmes.
These programmes without encryption can be
viewed free of charge.
television channel); however, the channel also
broadcast some un-encrypted programmes.
These programmes without encryption can be
viewed free of charge.
Select
Channels from the SETUP menu.
Highlight
Channel Decode and press ► or
to select.
Use ▲or ▼ to highlight the channel and
press
to set.
Analogue Channel Fine Tune
When the reception is poor, you can use this
function to do the fine tuning.
function to do the fine tuning.
In the SETUP menu press ▼ to highlight
Channels and press ► or
to select.
Press ▼ to highlight Analogue Channel
Fine Tune and press
to select.
Highlight and press
to select the
channel.
4
Use ◄ or ► to adjust the frequency. Press
◄ to decrease and ► to increase the
frequency.
frequency.
Common Interface
This function enables you to watch some pay
services (encrypted services). When the module
is inserted into the CI slot, you can access the
module menu. To purchase a module and smart
card, contact your dealer. Common Interface
functions may not be possible depending upon
the country broadcasting circumstances.
services (encrypted services). When the module
is inserted into the CI slot, you can access the
module menu. To purchase a module and smart
card, contact your dealer. Common Interface
functions may not be possible depending upon
the country broadcasting circumstances.
Press MENU and use ◄ or ► to select
SETUP.
Press ▼ to highlight Common Interface
and press ► or
.
Press
to select the CI card to view the
Module information.
Reset Default
Selecting Reset Default will reset all TV settings
to their original factory values, excludes Country,
Language OSD, and Channels.
to their original factory values, excludes Country,
Language OSD, and Channels.
In the SETUP menu press ▼ to highlight
Channels and press ► or
to select.
Select OK to confirm or select Cancel to
exit.
General controls
Selecting programme
positions
To select a programme position use the
numbered buttons on the remote control.
numbered buttons on the remote control.
Programme positions can also be selected using
P
P
P
.
To display on-screen information i.e. programme
position, input mode or stereo/mono signal,
press
position, input mode or stereo/mono signal,
press
. Press again to cancel.
Stereo and Bilingual
transmissions
If stereo or dual language broadcasts are
transmitted the word Stereo or Dual will appear
on the screen each time programme positions
are changed, disappearing after a few seconds. If
the broadcast is not in stereo the word Mono will
appear.
transmitted the word Stereo or Dual will appear
on the screen each time programme positions
are changed, disappearing after a few seconds. If
the broadcast is not in stereo the word Mono will
appear.
Stereo…
Press to select Stereo or Mono.
Bilingual… Bilingual transmissions are rare. If
they are transmitted the word Dual will display.
Choose the required programme number and
if the word Dual appears press
they are transmitted the word Dual will display.
Choose the required programme number and
if the word Dual appears press
to select
Dual 1, Dual 2 or Mono.
Audio Description
Audio description is an additional narration
describing on-screen action, body language,
expressions and movements for people with
visual disabilities. Press AD button to switch the
audio description On or Off.
describing on-screen action, body language,
expressions and movements for people with
visual disabilities. Press AD button to switch the
audio description On or Off.