Краткое Руководство По Установке для Whirlpool WFG231LVB
15
2. Remove the cap from the gas pressure regulator using a
flat-blade screwdriver.
NOTE: Make sure sealing washer remains in the same
position.
position.
3. To convert to Natural gas, unscrew the plastic adjustment
screw by hand, turn it over, and screw it in again.
4. Reinstall the cap.
To Convert Surface Burners
1. Remove burner grate, burner caps and burners.
2. Locate the Natural gas orifice spuds for top burners in the
bag containing literature included with the range. Three
Natural gas spuds are stamped “125,” one is stamped “132”
and one “128.”
Natural gas spuds are stamped “125,” one is stamped “132”
and one “128.”
3. Remove the LP gas orifice spuds using a 7 mm combination
wrench.
4. Install the Natural gas orifice spuds using a 7 mm
combination wrench.
NOTE: Depending on model, the range cooktop may be
equipped with 4 standard burners, 3 standard burners and
1 power burner, or 3 standard burners, 1 power burner and
1 center burner. Spud size/location remain the same.
equipped with 4 standard burners, 3 standard burners and
1 power burner, or 3 standard burners, 1 power burner and
1 center burner. Spud size/location remain the same.
5. Place LP gas orifice spuds in the parts bag for future use and
keep with the bag containing literature.
6. Reinstall burners, burner caps and burner grates.
A. Cap
Inlet pressure
to LP gas
to LP gas
Inlet pressure
to Natural gas
to Natural gas
A. Cap
B. Sealing washer
B. Sealing washer
C. Adjustment screw
A. Burner cap
B. Burner
B. Burner
C. Center burner
A
C
A
B
180º
A
B
C
A. Spud
B. Holder
B. Holder
A. Standard burner - Natural gas orifice spud number 125
B. Power burner - Natural gas orifice spud number 132
B. Power burner - Natural gas orifice spud number 132
C. Center burner - Natural gas orifice spud number 128
D. Standard burner - Natural gas orifice spud number 125
D. Standard burner - Natural gas orifice spud number 125
E. Standard burner - Natural gas orifice spud number 125
A
B
A
B
C
D
E