Справочник Пользователя для Welch Allyn Medical Diagnostic Equipment Medical Alarms 8.1x
Directions for use
Chapter 8 Discontinue Acuity System monitoring
133
Permanently stop monitoring
To permanently stop monitoring a patient
1.
From the monitor’s Main Menu, take these
steps.
steps.
For Propaq CS and Encore monitors:
a.
In the top left or right corner of the monitor, press NET OFF.
The monitor disconnects from the Acuity System.
b.
Turn off the monitor.
The trend information for this patient is erased from the monitor.
For a Micropaq monitor:
a.
Press
to
highlight
ACUITY, and then press
to select it.
b.
Select END TELE.
The monitor disconnects from the Acuity System.
c.
Remove the battery from the Micropaq monitor.
For a Propaq LT monitor:
a.
Press the arrow keys to underline
at the top of the
screen, and then press
to select it.
b.
Select Acuity menu.
c.
Select END TELE.
The monitor disconnects from the Acuity System.
d.
Turn off the monitor.
e.
Select Delete & Shut Down.
The trend information for this patient is erased from the monitor.
For a Welch Allyn 1500 Patient Monitor:
a.
Press the Standby key and select Discharge Patient.
The patient is discharged from the Acuity System and the
monitor enters standby mode.
monitor enters standby mode.
b.
Turn off the monitor.
The trend information for this patient is erased from the monitor.
2.
Discharge the patient from Acuity System monitoring.
For instructions, see